LM-12GI立体声音频隔离衰减器 Stereo audio isolation attenuator

频道:产品说明书 日期: 浏览:26

功能:将功放机扬声器输出端口高电平转为线路输出或者麦克风电平信号。

内部采用坡莫合金隔离变压器,频响好抗干扰

转换后的线路输出低电平信号可接有源低音炮,调音台,功放机或者其他音频设备线路输入接口;

转换后的麦克风输出低电平信号可接调音台、声卡或者其他音频设备的麦克风输入接口;

输入接口:螺钉插拔式接线端子;

线路输出接口:RCA莲花接口;

麦克风输出接口:3.5mm;

频率响应:40HZ-20KHZ

输入信号电压范围:4Ω/1W 8Ω/0.5W 2V至4Ω/100W 8Ω/50W 20V

衰减量:线路输出端:-7db至-33db可调;

麦克风输出端:-28db至-43db可调;

 

Function:

  Convert the high-level signal from the power amplifier's speaker output port into a line output or microphone-level signal.

It uses a permalloy isolation transformer internally, which delivers excellent frequency response and anti-interference performance.

The converted low-level line output signal can be connected to the line input interfaces of active subwoofers, mixers, power amplifiers, or other audio devices.

The converted low-level microphone output signal can be connected to the microphone input interfaces of mixers, sound cards, or other audio devices.

Interfaces & Technical Parameters

Input Interface: Screw plug-in terminal block

Line Output Interface: RCA phono interface

Microphone Output Interface: 3.5mm

Frequency response: 40HZ-20KHZ

Input Signal Voltage Range: 4Ω/1W, 8Ω/0.5W (2V) to 4Ω/100W, 8Ω/50W (20V)

Attenuation:

Line Output: Adjustable from -7dB to -33dB

Microphone Output: Adjustable from -28dB to -43dB

LM12-1.jpgLM15-5.jpgLM12-3.jpg